Tri-Chem AM2010 Gas Engine Treatment

Maximize performance, minimize costs!

Tri-Chem AM 2010 is a gas additive that has been used for over 20 years to increase system performance and fuel efficiency. Tri-Chem includes the IXL™ anti-friction metal conditioner to lubricate and protect the top end of the motor and the fuel injection system. Try some Tri-Chem in your vehicle today, and you will see the results!

Unlike most fuel additives, Tri-Chem AM 2010 is highly concentrated, and only a few ounces are needed each time you fill up. One quart (32 ounces) of Tri-Chem AM 2010 will treat 320 gallons of gasoline, or about 20 fill ups for the average car. You can give your engine IXL protection for only a few cents for every gallon of gasoline.

Follow these instructions:

Add 1 ounce of Tri-Chem into your fuel tank for every 10 gallons of gasoline. For best results add the Tri-Chem directly to your fuel tank immediately before fueling. Carefully store the Tri-Chem once it has been opened, so as not to spill.

Using more than the recommended dosage of Tri-Chem AM 2010 is not necessary for performance and is not advised. However, additional additive-provided that it is not more than triple the recommended dosage-will not damage your engine.

1 Quart treats up to 320 gallons of fuel.
1 Gallon treats up to 1,280 gallons of fuel.

Tri-Chem AM4020 Diesel Engine Treatment

Run leaner and cleaner!

Tri-Chem AM 4020 is a diesel fuel additive that protects and lubricates the top end of the motor, while also increasing fuel efficiency. Tri-Chem AM 4020 reduces injector failure by reducing carbon and gum build up. And unlike many fuel additives, Tri-Chem AM 4020 is highly concentrated-only a few ounces are needed each time you fill up. One quart (32 ounces) of Tri-Chem AM 4020 will treat up to 512 gallons of diesel fuel.

If you have a diesel engine that is smoking, pinging, dieseling, or that has excessive carbon or gum buildup, then you need to try some Tri-Chem AM 4020 today! We guarantee that you will be impressed.

Tri-Chem AM 4020 will also protect your fuel from gelling in cold environments. Use the cold weather instructions below for maximum performance in when the temperature drops!

For best results pour the appropriate amount of Tri-Chem AM 4020 into your tank immediately before you add the diesel fuel. The amount of Tri-Chem AM 4020 you need to use varies depending on the time of year and the temperature in which you will be operating your vehicle.

Follow these instructions:

SUMMER TREATMENT (ABOVE 32°F):
1 Oz. Tri-Chem treats 16 gallons of diesel fuel

WINTER TREATMENT (BELOW 32°F):
Increase dosage to prevent gelling; use 1 Oz. Tri-Chem for every 4 gallons of diesel fuel.
Use 1 Oz. Tri-Chem for every 2 gallons of diesel fuel in temperatures below -10°F

1 Quart treats up to 512 gallons of fuel.
1 Gallon treats up to 2,048 gallons of fuel.